This is a class I'm facilitating next week. Everyone gets to make their own winter scene so they will all be different, but here is my little winter scene on a book base using Tim Holtz Christmas 2018 Ideaology products.
The Dollar Store Book base was painted white and then covered with Holly Collage Paper. The Binding has a Christmas Quote Chip on it.
Decorated Woodland Trees
Salveged Deer and Design Tape Covered presents
Decorated Woodland Wreath on one of the Tiny Houses covered in Christmas Stash Wood paper.
Salveged Snowman painted and dusted with Rock Candy Glitter
A little pile of fire wood with a couple of retired Greenery leaves and a Beaded Berry (I hoard these because I love them!)
Salveged Snowman with more Design Tape covered presents with Crafter's Thread bows.
Two more tiny Woodland Trees and two pieces of fencing from the Village Cottage die.
The whole thing got a bit of Distress Resist Spray and a dusting of Rock Candy Distress Glitter.
I'm looking forward to seeing how different everyone makes their scene when starting with the same basic supplies. That's always the best part of a class.
Showing posts with label Tim Holtz Christmas 2018. Show all posts
Showing posts with label Tim Holtz Christmas 2018. Show all posts
Tuesday, December 11, 2018
Sunday, December 9, 2018
Best Wishes for the Holiday Season - Collage Paper Stamping
Christmastime CMS352 stamp set has several sentiments with fabulous vintage fonts. For this card I wanted the font to be in the forefront in a different way than the others, so I used the following Collage Paper technique.
Using my Stamp Platform, I stamped the sentiment on Plain Collage Paper, and then embossed it with silver embossing powder.
I stamped over it a second time and embossed it with black embossing powder.. Then I stamped over the back ground with the Music background stamp from the Music and Advent stamp set in Hickory Smoke Archival Ink. I stamped it in many different directions so it looked kind of like a collage.
I wanted to overlay it on something soft and vintage in a different color scheme, so I pulled these older stamp sets, Festive Sketch CMS283 and Holiday Drawings CMS284. I stamped them in Hickory Smoke Archival Ink onto Distress Mixed Media Heavystock, then watercolored with Distress Markers.
The next step was to adhere the collage paper onto the stamped background with Distress Collage Medium. Once it was dry I cut the sentiment out with one of the small Stitched Rectangle dies. I then cut a larger piece of silver metallic paper to be a mat and popped it up with dimensional adhesive over the place where I cut it out.
I added a little shimmer to the card with Brushed Pewter Distress Crayon.
The last few touches were to sew around the edge with silver metallic thread and attach some Ideaology Nailheads.
🎄🎄
Using my Stamp Platform, I stamped the sentiment on Plain Collage Paper, and then embossed it with silver embossing powder.
I wanted to overlay it on something soft and vintage in a different color scheme, so I pulled these older stamp sets, Festive Sketch CMS283 and Holiday Drawings CMS284. I stamped them in Hickory Smoke Archival Ink onto Distress Mixed Media Heavystock, then watercolored with Distress Markers.
The next step was to adhere the collage paper onto the stamped background with Distress Collage Medium. Once it was dry I cut the sentiment out with one of the small Stitched Rectangle dies. I then cut a larger piece of silver metallic paper to be a mat and popped it up with dimensional adhesive over the place where I cut it out.
I added a little shimmer to the card with Brushed Pewter Distress Crayon.
The last few touches were to sew around the edge with silver metallic thread and attach some Ideaology Nailheads.
🎄🎄
I
have another giveaway! It’s a pile of vintage ephemera and trinkets I
got from shopping Tim Holtz’s Vintage Stash Sale at Carson. ❄️❄️
If
you want to be entered, to win some of Tim’s Vintage Stash, comment on
any of my posts here with #timholtzchristmas2018 ☃️☃️
🎄🎄
I’ll pick a couple of names on Monday Dec 10 at 12 noon PT. 🌟🌟
Saturday, December 8, 2018
Merry Christmas and Happy New Year
Oh those delightful Christmas Overlay CMS357 stamps! I used them in two ways on this card and paired (there's that word again! LOL) them with the Music background stamp from Music & Advert CMS358 to make a card with a traditional Chrismas feel.
I started with stamping the wreath in Black Archival and watercoloring it with Distress Markers. Then I stamped the sentiment in Black archival and them in clear embossing with gold embossing powder.
The frame I made just by stamping the music in Black Soot Archival and adding Antique Linen. I died some seam binding with Festive Berries.
The large background is stamped with the holly stamp from the Christmas Overlay in Black Soot Archival and then water colored with Distress Markers. I completed the card by sewing around the edges with gold metallic thread.
🎄🎄
I started with stamping the wreath in Black Archival and watercoloring it with Distress Markers. Then I stamped the sentiment in Black archival and them in clear embossing with gold embossing powder.
The frame I made just by stamping the music in Black Soot Archival and adding Antique Linen. I died some seam binding with Festive Berries.
The large background is stamped with the holly stamp from the Christmas Overlay in Black Soot Archival and then water colored with Distress Markers. I completed the card by sewing around the edges with gold metallic thread.
🎄🎄
I
have another giveaway! It’s a pile of vintage ephemera and trinkets I
got from shopping Tim Holtz’s Vintage Stash Sale at Carson. ❄️❄️
If
you want to be entered, to win some of Tim’s Vintage Stash, comment on
any of my posts here with #timholtzchristmas2018 ☃️☃️
🎄🎄
I’ll pick a couple of names on Monday Dec 10 at 12 noon PT. 🌟🌟
Wednesday, December 5, 2018
Let it Snow Trinket Tin
The little Ideaology Christmas Trinket Tins are so little and sweet and allow for tiny miniature scenes to play out. So I present to you two little snowy scenes
First, I opened the tin and set it on it's side so it is wide horizontally. to keep it open I attached some dimensional adhesive under the lid so it would sit flat on top of the tin and not flip closed. Then I spread some Distress Grit Paste on the top and adhere a Quote Chip. Once it was secure I adhered two Snowflake Adornments and then added more Grit Paste to the top of the Quote Chip and on the snowflakes.
I took one of the Icicles and trimmed the corners to fit the shape of the tin. Then I spread some Glossy Accents on it and dusted it with Distress Rock Candy Glitter. Once that was Dry I adhered it to the tin with Glossy Accents and held it there until it dried.
The first little scene is a snowball fight in the making. I covered the inside of the tin with the Red Snowflake paper from the Christmas Paper Stash. Then went around the inside of the tin with the Ideaology Black polka dot Christmas Design Tape. The back area has a tree, a snow poster, and a 25 ticket all from the Christmas Snippets.
I spread more Grit Paste along the bottom of the lid and dusted it with Distress Glitter. Cut one of the Wood Slices in half and attach that at the bottom of the tree and add more Grit Paste. I rolled some Baubles in Distress Collage Medium and then Rock Candy Distress Glitter to make snowballs.
The next step was to color some of the tiniest of the Christmas Paper Dolls and attach them around in the snow. I mostly just put a little Collage Medium on their feet and stuck them in the snow. The one little kid on the wood slice is attached to the long icicle.
For the second scene I covered the back and sides of the box with the black greenery paper. I covered the front edge of the tin with the red plaid Christmas Design Tape. Again I spread Grit paste over the bottom and dusted it with glitter.
The I added a few piece of the smaller Icicle that I had glittered previously. I put two small pieces on each corner and a tiny bit of the left over in the center. Then to cover the parts without icicles, I attached the red Icicles for decorating strio with Collage Medium.
I used the Birch die cut and cut it out of Distress Watercolor Paper so it was a nice, this white paper. I stamped over it with the Birch background stamp from Stampers
Anonymous in Ground Espresso Archival. I did cut the piece to fin in the
tin, but then cut it in half and attached on piece barely popped up
from the back. The piece on the right is popped up quite a bit to add
some dimension.
I sprayed one small and two mini Woodland Trees with Peeled Paint Distress Spray, and then added Collage Medium and dusted then with glitter. Then attached them to each side of the tin. I added two more of the smallest Christmas Paper Doll kiddos, and one tiny Salvaged Deer.
Now all that is left is to make a base to display it on. I started with the large Vignette Base, rubbed some Picket Fence Distress Paint on it and then wiped any excess off.
Then I used one of my new favorite wintery dies, the Ice Flake Bigz die. I cut two out of the Ideaology Mirror Sheets and Sizzix White Mat Board. I adhered them to the board and then attached them to the base.
In order to be able to see the two flakes, I attached a wood slice to the top of the Vignette Base. Then attached an Ice Flake. Then I attached another wood slice and the second Ice Flake. Once it was dry, I sprayed it with Distress Resist Spray and dusted it with Glitter.
Lastly I attached the Trinket Box to the top Ice Flake and added a little more Grit Paste and glitter so you couldn't see the edge of the box too prominently.
The last touch was the bit of Seam Binding ribbon lightly colored with Brushed Pewter Distress Spray.
In honor of the white, fluffy snow in this piece, I posted my grandmother's Divinity candy recipe on my recipe blog. It's a tough candy to make, but it has a special place in my childhood memories. I hope you take a look.
Tami
I am an affiliate with Simon Says Stamp and Scrapbook.com so the links below send you to one of those stores depending on which logo you choose. If you wish to purchase something from either store and use one of my links below, I get a small percentage of your order, at no additional cost to you. This helps me to defray the costs of this blog, the time, the ideas and tutorials I post here. Your help is greatly appreciated! Thank you!
First, I opened the tin and set it on it's side so it is wide horizontally. to keep it open I attached some dimensional adhesive under the lid so it would sit flat on top of the tin and not flip closed. Then I spread some Distress Grit Paste on the top and adhere a Quote Chip. Once it was secure I adhered two Snowflake Adornments and then added more Grit Paste to the top of the Quote Chip and on the snowflakes.
I took one of the Icicles and trimmed the corners to fit the shape of the tin. Then I spread some Glossy Accents on it and dusted it with Distress Rock Candy Glitter. Once that was Dry I adhered it to the tin with Glossy Accents and held it there until it dried.
The first little scene is a snowball fight in the making. I covered the inside of the tin with the Red Snowflake paper from the Christmas Paper Stash. Then went around the inside of the tin with the Ideaology Black polka dot Christmas Design Tape. The back area has a tree, a snow poster, and a 25 ticket all from the Christmas Snippets.
I spread more Grit Paste along the bottom of the lid and dusted it with Distress Glitter. Cut one of the Wood Slices in half and attach that at the bottom of the tree and add more Grit Paste. I rolled some Baubles in Distress Collage Medium and then Rock Candy Distress Glitter to make snowballs.
The next step was to color some of the tiniest of the Christmas Paper Dolls and attach them around in the snow. I mostly just put a little Collage Medium on their feet and stuck them in the snow. The one little kid on the wood slice is attached to the long icicle.
For the second scene I covered the back and sides of the box with the black greenery paper. I covered the front edge of the tin with the red plaid Christmas Design Tape. Again I spread Grit paste over the bottom and dusted it with glitter.
The I added a few piece of the smaller Icicle that I had glittered previously. I put two small pieces on each corner and a tiny bit of the left over in the center. Then to cover the parts without icicles, I attached the red Icicles for decorating strio with Collage Medium.
Now all that is left is to make a base to display it on. I started with the large Vignette Base, rubbed some Picket Fence Distress Paint on it and then wiped any excess off.
Then I used one of my new favorite wintery dies, the Ice Flake Bigz die. I cut two out of the Ideaology Mirror Sheets and Sizzix White Mat Board. I adhered them to the board and then attached them to the base.
In order to be able to see the two flakes, I attached a wood slice to the top of the Vignette Base. Then attached an Ice Flake. Then I attached another wood slice and the second Ice Flake. Once it was dry, I sprayed it with Distress Resist Spray and dusted it with Glitter.
Lastly I attached the Trinket Box to the top Ice Flake and added a little more Grit Paste and glitter so you couldn't see the edge of the box too prominently.
The last touch was the bit of Seam Binding ribbon lightly colored with Brushed Pewter Distress Spray.
In honor of the white, fluffy snow in this piece, I posted my grandmother's Divinity candy recipe on my recipe blog. It's a tough candy to make, but it has a special place in my childhood memories. I hope you take a look.
Tami
I am an affiliate with Simon Says Stamp and Scrapbook.com so the links below send you to one of those stores depending on which logo you choose. If you wish to purchase something from either store and use one of my links below, I get a small percentage of your order, at no additional cost to you. This helps me to defray the costs of this blog, the time, the ideas and tutorials I post here. Your help is greatly appreciated! Thank you!
Milk Cap Christmas Tree
This is a crazy little take on milk for Santa's cookies. I made it for my kitchen Christmas mantle using the Ideaology Milk Caps and various Ideaology Christmas Adornments.
One of my favorite things about this piece is the metal frame. I learned this technique from Paula Cheney. I started with the frame from the large Framed Panel, and covered it Ranger Foil Tape Sheets 6x12".
I cut one 6x12 piece into four 1.5" pieces and then trimmed them down to the size of each side of the frame. You will want to miter the corners as seen below.
Then you peel off the backing and carefully apply the foil to the frame.
Wrap the excess around to the back.
Work the foil onto the frame using your fingers and a bone folder to adhere it into the little nooks and crannies.
Once the entire frame is covered you want to rub Distress Crayons onto the frame so that it goes into all the depressions.
Once the frame is completed, I covered the panel with a piece of the Christmas Text paper and then adhered the metal frame. Once the frame is firmly adhered, it gives you the border, so I started to arrange the milk caps in the shape of a tree. While doing so I decided which milk caps I wanted to feature with a special vintage item. Of course the Merry Christmas Milk was my first choice!
I tried to vary the sizes, along with Ideaology Christmas Tokens and Pinecones. For an added Christmasy touch, I cut the fasteners off the Jingle Brads and adhered the jingles to the tops of the tokens.
Make sure that you layer the milk caps as well. Some will cover parts of the milk caps underneath. I also added dimensional adhesive to some of the Milk Caps for even more interest.
I also chose the Chocolate Milk cap to represent the trunk of the tree. The Christmas Word Band was added at the bottom to anchor the piece. You might be able to see that I cut the rings off the pinecones, added a little Glossy Accents and then dipped them in Distress Rock Candy Glitter.
Once everything was in place, I punched a few circles and masked the milk caps I wanted to cover with the glass pieces. Then I sprayed the entire piece with Distress Resist Spray and dusted it with Distress Rock Candy Glitter.
One really fun item that was actually the inspiration for this piece, is the inclusion of these vintage phoropter lenses used by opthamologists to find your eye glass prescriptions. I thought it was a fun way to highlight a few of the milk caps as well as adding some dimension and sparkle. I attached these to the milk caps that I masked off when I glittered the piece.
I got several of these vintage phoropter lenses from the Tim Holtz Vintage Stash Sale he had at the Carson Original Stamp Show Stampers Anonymous booth in July and November.
I was trying to figure out what to do with them and then this Milk Cap Christmas Tree idea popped into my head, so I ran into my studio to see if they fit over the Milk Caps. Yay! They did!
And a really fun thing about them is that they have numbers on the silver tabs, and they vary in thickness, just like glasses.
I hope this project inspires you to get out those Milk Caps and make something fun and festive with them. It doesn't have to be a tree, it could be a wreath or a candy cane or a bell or something else you dream up.
And I hope you give Paula's metallic foiled frame technique a try. The foil is incredibly forgiving and once you actually get started it is fun and simple. I'm definitely doing this technique again!
Thinking ahead for Santa, we know he loves cookies with milk, so share a link or recipe in the comments for one of your favorite cookies.
I love all kinds of cookies, but this is one of my favorites. I'm not a huge gingersnap person, but a lady named Donna Godfrey shared this recipe in an email newsletter way back before the invention of blogs. I have several fabulous recipes from her that have become go-to's over the years. This is one of my favorite fall/winter recipes. I hope you enjoy them!
World's Best Gingersnaps
Tami
I am an affiliate with Simon Says Stamp and Scrapbook.com so the links below send you to one of those stores depending on which logo you choose. If you wish to purchase something from either store and use one of my links below, I get a small percentage of your order, at no additional cost to you. This helps me to defray the costs of this blog, the time, the ideas and tutorials I post here. Your help is greatly appreciated! Thank you!
I cut one 6x12 piece into four 1.5" pieces and then trimmed them down to the size of each side of the frame. You will want to miter the corners as seen below.
Then you peel off the backing and carefully apply the foil to the frame.
Wrap the excess around to the back.
Work the foil onto the frame using your fingers and a bone folder to adhere it into the little nooks and crannies.
Once the entire frame is covered you want to rub Distress Crayons onto the frame so that it goes into all the depressions.
Once the frame is completed, I covered the panel with a piece of the Christmas Text paper and then adhered the metal frame. Once the frame is firmly adhered, it gives you the border, so I started to arrange the milk caps in the shape of a tree. While doing so I decided which milk caps I wanted to feature with a special vintage item. Of course the Merry Christmas Milk was my first choice!
I tried to vary the sizes, along with Ideaology Christmas Tokens and Pinecones. For an added Christmasy touch, I cut the fasteners off the Jingle Brads and adhered the jingles to the tops of the tokens.
Make sure that you layer the milk caps as well. Some will cover parts of the milk caps underneath. I also added dimensional adhesive to some of the Milk Caps for even more interest.
I also chose the Chocolate Milk cap to represent the trunk of the tree. The Christmas Word Band was added at the bottom to anchor the piece. You might be able to see that I cut the rings off the pinecones, added a little Glossy Accents and then dipped them in Distress Rock Candy Glitter.
Once everything was in place, I punched a few circles and masked the milk caps I wanted to cover with the glass pieces. Then I sprayed the entire piece with Distress Resist Spray and dusted it with Distress Rock Candy Glitter.
One really fun item that was actually the inspiration for this piece, is the inclusion of these vintage phoropter lenses used by opthamologists to find your eye glass prescriptions. I thought it was a fun way to highlight a few of the milk caps as well as adding some dimension and sparkle. I attached these to the milk caps that I masked off when I glittered the piece.
I got several of these vintage phoropter lenses from the Tim Holtz Vintage Stash Sale he had at the Carson Original Stamp Show Stampers Anonymous booth in July and November.
I was trying to figure out what to do with them and then this Milk Cap Christmas Tree idea popped into my head, so I ran into my studio to see if they fit over the Milk Caps. Yay! They did!
And a really fun thing about them is that they have numbers on the silver tabs, and they vary in thickness, just like glasses.
I hope this project inspires you to get out those Milk Caps and make something fun and festive with them. It doesn't have to be a tree, it could be a wreath or a candy cane or a bell or something else you dream up.
And I hope you give Paula's metallic foiled frame technique a try. The foil is incredibly forgiving and once you actually get started it is fun and simple. I'm definitely doing this technique again!
Thinking ahead for Santa, we know he loves cookies with milk, so share a link or recipe in the comments for one of your favorite cookies.
I love all kinds of cookies, but this is one of my favorites. I'm not a huge gingersnap person, but a lady named Donna Godfrey shared this recipe in an email newsletter way back before the invention of blogs. I have several fabulous recipes from her that have become go-to's over the years. This is one of my favorite fall/winter recipes. I hope you enjoy them!
World's Best Gingersnaps
Tami
I am an affiliate with Simon Says Stamp and Scrapbook.com so the links below send you to one of those stores depending on which logo you choose. If you wish to purchase something from either store and use one of my links below, I get a small percentage of your order, at no additional cost to you. This helps me to defray the costs of this blog, the time, the ideas and tutorials I post here. Your help is greatly appreciated! Thank you!
Subscribe to:
Posts (Atom)