This is a masculine shaker card that I thought would be good for a a guy's birthday card or father's day card, especially for a cyclist.
I used two of the newest stamp releases from Tim Holtz and Stampers Anonymous called Eclectic Adverts CMS372 and Inventor 7 CMS374.
I stamped the gears from the Inventor 7 set onto a piece of Distress Mixed Media Heavystock in Black Soot Distress Archival Ink. Then I colored the paper with Pumice Stone, Walnut Stain, and Hickory Smoke Distress Inks using the Wrinkle Free Distress Method.
Then I used the Stacked Lables dies from Tim Holtz and Sizzix, and I
chose one that fit nice around the Victors Tires Advert. Then cut out a
window from the center of the piece. I added a piece of acetate behind
the opening and then dimensional adhesive all around the outside edges
to make a window for the shaker portion.
I colored a second piece of Heavystock with Hickory Smoke, Evergreen Bough, and Walnut Stain. Then on a stamp platform, I laid the gear frame over the green piece where it would go and I positioned the Victor's stamp in the center of the opening. Then I removed the window and stamped the advert in Black Soot Archival Ink.
Before attaching the window, I needed the shaker bits, so I stamped several of the wheels from the bike onto some Heavystock. Then I cut them out and used those as the shaker bits.
To finish it off, I added my usual bit of sewing, and some of my new favorites, the Hardware Heads.
Thanks for checking out this card! Pretty basic for a shaker, but easy enough to duplicate.
Tami
I am an affiliate with Simon Says Stamp and Scrapbook.com so the links
below send you to one of those stores depending on which logo you
choose. If you wish to purchase something
from either store and use one of my links below, I get a small
percentage of your order, at no additional cost to you. This
helps me to defray the costs of this blog and the ideas and tutorials I
post here, and your help is greatly appreciated! Thank you!
2 comments:
Love your card Tami. I couldn’t figure out the shaker part for a while till I checked out your blog. Thanks for sharing. 😍
This is so creative! Love how you used the wheels for shaker bits! Gorgeous card Tami!
Post a Comment